System variables
QDI/DRS DSC sets up some
System variables to hold the information stored for each respondent in the standard .
drs variables. These variables are recorded in the first three lines relating to a respondent in the .
drs file. The first of these lines always starts with
##recstart, the second with
##ac, and the third with
##init. Here is an example:
##recstart 20
##ac rodriguez-u 000830 174522 174908 346 967675522 967675748
##init 20 1 0 0 1 3 2 255 0 54235
System variables used by QDI/DRS DSC
The following list shows how QDI/DRS DSC stores the information in the system variables.
Respondent.Serial
Taken from the ##recstart line. (20 in this example.)
DataCollection.InterviewerID
Taken from first field on the ##ac line. (rodriguez-u in this example.)
DataCollection.StartTime
Taken from the second and third fields on the ##ac line. (000830 and 174522 in this example.)
DataCollection.FinishTime
Taken from the second and fourth fields on the ##ac line. (000830 and 174908 in this example.)
QDI/DRS DSC also creates the system variables DataCollection.Status and DataCollection.SeedValue, but does not use them to store data. No other system variables are created.
See also