Code
|
Class
|
Type
|
Description
|
---|---|---|---|
30100
|
SRV
|
Message
|
Server shut down by the application.
|
30101
|
SRV
|
Message
|
Server shut down by either ALT+F4 or kill command
|
30102
|
SRV
|
Message
|
User <username> issued shut down server command, user id <username>
|
30103
|
SRV
|
Message
|
Server shut down by unknown user (sc==NULL)
|
30104
|
SRV
|
Message
|
Shutdown aborted; denied by user callback.
|
30105
|
SRV
|
Message
|
<server_name> is shut down
|
30106
|
SRV
|
Message
|
Some thread still active wait extra <value> seconds...
|
30106
|
SRV
|
Message
|
Failed to set Srv.TaskThreadPriority, value not changed.
Note Srv.TaskThreadPriority is an internal parameter. solidDB® Support might ask you to set this parameter for troubleshooting purposes.
|
30110
|
SRV
|
Message
|
Service <service_name> installed
|
30111
|
SRV
|
Message
|
Service <service_name> removed
|
30112
|
SRV
|
Message
|
Install service <service_name> failed! Error code <error_code>
|
30113
|
SRV
|
Message
|
Remove service <service_name> failed! Error code <error_code>
|
30114
|
SRV
|
Message
|
Usage for service option: -s{start|install|remove} name exepath [autostart]
|
30115
|
SRV
|
Message
|
Failed to change the current working directory to <directory_name>
|
30116
|
SRV
|
Message
|
Current working directory changed to <directory_name>
|
30117
|
SRV
|
Message
|
<solidDB®_version>
|
30118
|
SRV
|
Message
|
<copyright>
|
30119
|
SRV
|
Message
|
<startup_time>
|
30120
|
SRV
|
Message
|
Failed to start the server. Exiting from <value>
|
30121
|
SRV
|
Message
|
Causing intentionally an access violation...
|
30122
|
SRV
|
Message
|
Causing intentionally an internal error...
|
30123
|
SRV
|
Message
|
Exiting server with ADMIN COMMAND 'errorexit <number>'...
|
30124
|
SRV
|
Message
|
Exiting server with ADMIN COMMAND 'assertexit'...
|
30125
|
SRV
|
Message
|
Admin command: <command>
|
30126
|
SRV
|
Message
|
Admin event: <command>
|
30127
|
SRV
|
Message
|
Invalid license file <license_file>
|
30128
|
SRV
|
Message
|
Using license file <license_file>
|
30129
|
SRV
|
Message
|
Signal <value>
|
30130
|
SRV
|
Message
|
Server process has encountered an internal error and is unable to continue normally.
|
30131
|
SRV
|
Message
|
Command line: <value>
|
30132
|
SRV
|
Message
|
SS_DEBUG=<value>
|
30133
|
SRV
|
Message
|
Asynch pingtest completed successfully to <value>.
|
30134
|
SRV
|
Message
|
Alternate inifile name is too long (>254); parameter ignored.
|
30140
|
SRV
|
Message
|
The argument following option -x pagedmem:[client:] must be 16, 32, or 64 (default: 16)
|
30141
|
SRV
|
Message
|
Testing system performance.
|
30142
|
SRV
|
Message
|
Testing was successful.
|
30143
|
SRV
|
Message
|
Testing failed.
|
30144
|
SRV
|
Message
|
Server in backup server mode. Operation refused
|
30145
|
SRV
|
Message
|
Connect failed illegal user name or password
|
30146
|
SRV
|
Message
|
Failed to create thread <value>
|
30147
|
SRV
|
Message
|
HSB enabled server cannot operate without HotStandby license: set HotStandby.HSBEnabled to No.
|
30148
|
SRV
|
Message
|
<value> option is activated.
|
30149
|
SRV
|
Message
|
Server emergency shutdown.
|
30150
|
SRV
|
Fatal Error
|
Server not started.
This error is given if the solidDB® server cannot be started.
|
30151
|
SRV
|
Message
|
Database started.
|
30152
|
SRV
|
Message
|
Memory allocation size has exceeded <value>MB. Current size: <value> butes. Number of allocations: <value>.
|
30153
|
SRV
|
Message
|
Memory allocation size has fallen below <value>MB. Current size: <value> bytes. Number of allocations: <value>.
|
30154
|
SRV
|
Message
|
Statement (id: <userid> userid: <type> type: <value>) has allocated <value> bytes of memory SQL: <value>.
|
30155
|
SRV
|
Message
|
Process size <virtual_size> is <above|below> the <warning_level|limit|low_level> <value>
|
30156
|
SRV
|
Message
|
Server health check monitoring started.
|
30158
|
SRV
|
Message
|
Parameter General.MultiprocessingLevel has been set automatically to <value>, the number of logical CPUs detected.
As of V6.5 Fix Pack 4, the factory value of General.MultiprocessingLevel is read from the system as the number of logical processing units. With some processor architectures, the number of logical processing units might not be the same as the number of physical cores. In such cases, the optimal value for this parameter typically varies between the number of the physical cores and the number of logical processing units.
|
30159
|
SRV
|
Message
|
Failed to load external authentication module. Cannot login externally authenticated users. See Encryption for more details.
|
30160
|
SRV
|
Message
|
GSKit is not enabled. Cannot login externally authenticated users.
See “Encryption for more details.
|
30161
|
SRV
|
Message
|
Strong encryption enabled.
|
30162
|
SRV
|
Message
|
Strong encryption disabled, using default.
|
30163
|
SRV
|
Message
|
Opening an encrypted database file.
|
30164
|
SRV
|
Message
|
Encrypting the database file
|
30165
|
SRV
|
Message
|
Decrypting the database file.
|
30166
|
SRV
|
Message
|
Database file is not encrypted.
|