Architecting and designing > Generic enterprise architecture frameworks > Technology Model view > Switch
  
Switch
Switch symbols are a mixture of hardware and software devices that provide ability to switch information to different paths on the network.
As a default, the following switch symbols are provided on the Network Concept diagram:
Access Gateway
ATM Switch
Data Center Switch
ATM Fast GB Ether Switch
Automatic Protection Switch
Bridge
Class 4-5 Switch
Content Switch
Data Center Switch Processor
Distributed Director
ISDN Switch
KVM Switch
Lan2Lan Switch
Layer 2 Remote Switch
Multi Layer Switch
Multi Switch Device
Multi Layer Remote Switch
Optical Cross Connect
Optical Transport
PBX Switch
PC Adapter Card
Universal Gateway
VIP
Virtual Layer Switch
Voice Enabled ATM Switch
Workgroup Switch
Workgroup Switch Voice Enabled
Lan-to-Lan Switching Software
Wireless Bridge
Advanced Network Symbols
If the "Advanced Network Symbols" switch is turned on in the Advanced dialog, the following additional types of icons will be available:
BBSM
Local Director
MAU
Route Switch Processor with SI
Route Switch Processor without SI
Transpath
Edge Label Switch Router
Edge Label Switch Router with Netflow
Generic Softswitch
IntelliSwitch Stack
IP DSL Switch
ITP
Program Switch
Cisco Network Symbols
If the "Cisco Network Symbols" switch is turned on in the Advanced dialog (select Tools, Customize Method Support, Encyclopedia Configuration, and then select the Advanced button), the following additional types of icons become available:
BTS SoftSwitch
Cisco 5500
Cisco 6701
CSS 11000
MGX 8220
MGX 8240
MGX 8260
VSC3000 Virtual Switch Controller
See also
Technology Model view