Switch symbols are a mixture of hardware and software devices that provide ability to switch information to different paths on the network.
As a default, the following switch symbols are provided on the Network Concept diagram:
▪Access Gateway
▪ATM Switch
▪Data Center Switch
▪ATM Fast GB Ether Switch
▪Automatic Protection Switch
▪Bridge
▪Class 4-5 Switch
▪Content Switch
▪Data Center Switch Processor
▪Distributed Director
▪ISDN Switch
▪KVM Switch
▪Lan2Lan Switch
▪Layer 2 Remote Switch
▪Multi Layer Switch
▪Multi Switch Device
▪Multi Layer Remote Switch
▪Optical Cross Connect
▪Optical Transport
▪PBX Switch
▪PC Adapter Card
▪Universal Gateway
▪VIP
▪Virtual Layer Switch
▪Voice Enabled ATM Switch
▪Workgroup Switch
▪Workgroup Switch Voice Enabled
▪Lan-to-Lan Switching Software
▪Wireless Bridge
Advanced Network Symbols
If the "Advanced Network Symbols" switch is turned on in the Advanced dialog, the following additional types of icons will be available:
▪BBSM
▪Local Director
▪MAU
▪Route Switch Processor with SI
▪Route Switch Processor without SI
▪Transpath
▪Edge Label Switch Router
▪Edge Label Switch Router with Netflow
▪Generic Softswitch
▪IntelliSwitch Stack
▪IP DSL Switch
▪ITP
▪Program Switch
Cisco Network Symbols
If the "Cisco Network Symbols" switch is turned on in the Advanced dialog (select Tools, Customize Method Support, Encyclopedia Configuration, and then select the Advanced button), the following additional types of icons become available: