The following diagram shows a Transparent Connectivity (TC) configuration for a typical HotStandby (HSB) setup where the application and the servers are within the same network.
TC connection with multi-home servers
The following diagram shows a TC configuration for a HotStandby setup where the primary and secondary servers are multi-home servers. It is typical in setups where the application and the servers are in different networks or the application cannot or should not connect to the servers using the same network that is used for the HotStandby connection between the servers.
To differentiate between the TC connection and the HotStandby connection, you must use two parameters that define the server addresses:
The HotStandby.Connect parameters specify the server addresses that are used for the HotStandby connection between the primary and secondary servers.
The HotStandby.TCConnect parameters specify the server addresses that are used with the TC connection.
